Ottomatics Inc. Machine List

Specifications

Control: Fanuc 18-iTB
Max. Bar Diameter: 38 mm
Max. Turning Length: 210 mm (250mm opt)
Max. Drilling / Tapping on Main Spindle: 12 mm / M8
Machining Capacity
Max. Sub Spindle Chucking Diameter: 32 mm
Thru hole capacity: 33 mm
Max. Drilling / Tapping on Sub Spindle: 10 mm / M8
Max. Drilling / Tapping on Cross Slide: 10 mm / M8
Max. Key Cutter Diameter on Cross Slide:40 mm
Max. Main Spindle Speed: 8,000 RPM
Max. Sub Spindle Speed: 8,000 RPM
Max. Cross Spindle Speed: 8,000 RPM
Total # of Tools: 18 (20 - Optional Spec.)
5OD / 4 Cross Live / 3 ID
(5 ID Opt)
Machining Capability
Number of Front-end Face Tools: 3 Live
Number of Back-end Face Tools: 3 Live /1 Fixed
Turning Tool Shank Size: 5/8" x 4-3/4"
Rapid Traverse: 32 m / min. (1260 ipm)
Number of Controllable Axes: 7
Main Spindle Positioning: .001 degree (Full C-Axis)
Disc Brake
Sub Spindle Positioning: .001 degree (Full C-Axis)
Disc Brake
Motors
Main Spindle: 5.5 / 7.5 kw cont. / 30 min.
Sub Spindle: 1.5 / 2.2 kw cont. / 30 min.
Cross Drill / Mill Unit: .55 / 1.1kw
Rotary Guide Bushing Drive: Spline Shaft
Back-end Face Tools: 1.0 kw
Coolant Pump Motor: .45 kw
Lubrication Pump Unit: .04 kw
Dimensions
Coolant Capacity: 200 L (53 Gal)
Spindle Center Height: 1,000 mm
Length / Width / Height: 2,140 / 1,375 / 1670 mm
Net Weight: 7,700 lbs