Sold!
Buy one like this

I want to sell a machine like this

  • Automatic
  • Warner & Swasey
  • 3 AC
  • Single Spindle Chucker
  • 1975

Specifications

Cross Slide Cutter Blocks
Multiple Turning Heads
Pentagon Coolant Distributer
Pentagon Tool Holders
36 Turret Feeds .0019-.124"
Chuck Size 15 or 18"
Cross Feeds Same as Turret
Cross Slide Max Travel 11"
Max Work Stroke 11"
Motor HP 40/20
Spindle Flanged Nose ASA2 11"
Spindle Speeds 15-826 RPM
Swing Over Cross Slides 15.5"
Weight: 20,800 Lbs

Notes

The W&S Model M-3930 Serial Numbers are as follows:|1. Lot 711 SN# 2735998|2. Lot 697 SN#2717814|3. Lot 828 SN#2813264|4. Lot 34 SN#2299559||These 4 are under power at this time and tooled heavy. 18" 3 Jaw chucks with air cylinders on each machine. Pentegon holders each station has a pentagon holder. Mostly multiple turning heads. Cross Slide Cutter blocks for each machine. Some boring bars and CMNG 644 carbide holders. Extra speed and feed dogs. |Voltage is 440 volt US Electrics. Transmissions are fine the Chucks are fine Machines are fine no problems.|