Send Me A Quote

I want to sell a machine like this

  • Transfer Machine
  • Diedesheim
  • Diamat 70-9
  • Rotary
  • 127


This sheet (The Pdf file - link below)
will give you the spindle RPM and motor HP and exactly
what operation is performs. Each E-XX is a spindle. The spindle
number that ends in a X1 is a vertical spindle that feeds from the
bottom up. the X2 numbers are spindles that feed horizontally, the
numbers X3 are vertical spindles that feed from the top down. The
machine has 9 stations.
The spindles are mounted to slides that are controlled with a servo motor.
To move a spindle you would have to change the mounting for the slide.
Some heads have coolant through the spindle, you will see the coolant
pressure rating in Bars.
One last thing. The Diedesheim is an awesome machine, it can be
transformed to; drill, ream or tap almost anything.
Station 1 - Loading
Station 2 - Unit 21 Hydr. Boring Unit, unit 22 Mechanical Boring Unit Unit 23 Mech. Boring Unit -
x axis CNC programmable - coolant through spindle.
Station 3 Unit 31 Hydr. Boring Unit Unit 32 Mechanical Threading Z-axis CNC Programmable. Screw
Leader, tooth belt drive Unit 33 - Mechanical Boring.
Station 4 Unit 41 Mech Boring Unit, Unit 42 Hydraulic Probing and Splashing Device
Unit 43 Mechanical boring,
Station 5 Unit 51 - Idle position cover, unit 52 Mechanical Boring, Unit 53 Mechanical Boring
Station 6 Unit 61 Mechanical Boring, Unit 62 Hydraulic Probing and Splashing Device UNit 63 Boring
Station 7 Unit 71 Boring, Unit 72 Boring,
Station 8 Unit 81 Mechanical Threading GP70 Z axis CNC, Unit 82 Boring
Unit 83 Mechanical Threading GP70 Z axis CNC,
Station 9 UNit 93 Boring MES 70
440 volt 60 Cycle
Coolant and Chip Disposal