I want to sell a machine like this
- CNC Swiss
- Hanwha
- XD38H
- Lathe - CNC
- 1.5"
- 2014
- B Axis:
- C Axis:
- Sub Spindle:
- Live Tooling:
Specifications
Main Spindle:Spindle Speed range 300 to 8,000 RPM
AC Spindle Drive Core Motor 10.0 HP
C-Axis Control minimum programmable angle 0.001 Deg.
C-Axis locking gear Every Degree.
Z1-Axis Horsepower 2.0 HP
Z1-Axis Stroke 12.500”
Z1-Axis Rapid Traverse 1,200 IPM
Sub-Spindle:
Spindle Speed range 300 to 7,000 RPM
AC Spindle Drive Core Motor (Chilled) 5.0HP
C-Axis Control minimum programmable angle 0.001 Deg.
C-Axis Magnetic Brake Every Degree.
Z2-Axis Stroke 12.500”
Z2-Axis Rapid Traverse 1,200 IPM
Z2-Axis Horsepower 2.0 HP
Cross Working Spindles:
Spindle Speed range 200 to 8,000 RPM
AC Spindle Drive Geared 1.5 HP
Tool Position:
O.D. Tool Positions 5
O.D. Tool Shank 0.625” Sq
Cross Mill / Drill Stations 5
Main Spindle I.D. Tool Positions Total (ER-16 Type) 7
5 Stationary from the Main Tool Stand
2 Powered Face Mill / Drill stations independent from the Main Tools
Sub-Spindle I.D. Tool Positions with Y2 axis 13
5 Stationary from the Main Tool Stand
4 Stationary Independent from the Main Tools
4 Gear Driven Independent from the Main Tools to 6,000 RPM
Coolant / Lubrication Systems:
Coolant Pump Motor 0.6 HP
Coolant Tank Capacity 45 Gallons
Way Lube Tank Capacity 0.48 Gallons
Machine Dimensions:
Width 65”
Length 94”
Height 69”
Weight 9,500 LBS
General Specifications:
Voltage 3 Phase 200V-220V
Power Required 30 KVA
Compressed Air 80 PSI
Notes
AC Servo Axes Control with 2 Horsepower Fanuc Motors
Main Spindle Speed 200-8,000 rpm (TF44 Collet Chuck)
Sub Spindle Speed 200-7,000 rpm (TF40/44,Collet Chuck)
Full Stroke Synchronous Rotary Guide Bushing Unit (H38D)
Full C-Axis Control, Both Main & Sub Spindles
V shape Locking for Heavy Milling, Both Main & Sub-Spindles
Cross Drilling Unit, 5 Stations with Holders 200-6,000 rpm
2 Driven Front End Working Tools, 200-6,000 RPM
4 Driven Rear End Working Tools, 200- 6,000 RPM
4 Stationary Rear End Working Tools
Rigid Tapping on Driven Spindles (Main, Sub & Cross)
Manual Pulse Generator
Coolant Pump with High Flow Rates
Part Conveyor with Part Collection Tray
Parts Separator
Pneumatic Part Ejection & Detection for Front Ejection
Centralized Automatic Lubrication System w/Level Detector
Coolant Flow Detector for Safe Unmanned Operation
Tool Area Work Light
Signal Tower (3 Colors)
Work Door Interlocks for Safety
Tool Box w/Tools for Set Up and Service
Cutting Oil Tank & Flow Detector (45 Gal)
Leveling Bolts and Pads
Test Chart
Parameter List
One Complete Set of Manuals
Hanwha XD38Hll Specifications
Hanwha Fanuc 32i-B Series Controller
Standard Tooling Package:
5 Turning Stations (5/8” or 16mm Square Shank)
7 Front Work (2 Power Driven & 5 Single End ER-20 Drill Sleeves)
8 Back Work (4 Power Driven & 4 Stationary)
5 Cross Drilling/Milling/Slotting Stations (ER16)