Sold!
Buy one like this

I want to sell a machine like this

  • CNC Machine
  • Daewoo Doosan
  • TT1800SY
  • Lathe - CNC
  • 2.62
  • 2008
  • B Axis:
  • C Axis:
  • Y Axis:
  • Dual Spindles:
  • Live Tooling:

Specifications

Capacity Maximum Distance Between Spindle Ends ( 38.58") 980mm
Maximum Turning Diameter Upper Turret (9.05" ) Φ230mm
Lower Turret (9.05" ) Φ230mm
Max. Turning Length(from each spindle ( 9.05" ) 230mm
Bar Working Diameter ( 2.63") Φ67mm
Main spindle 1 Spindle Speed 5,000 r/min
Cs spindle Index Angle 360(0.001) deg
Cs spindle Index Angle 600 r/min
Main spindle 2 Spindle Speed 5,000 r/min
Cs spindle Index Angle 360(0.001) deg
Cs spindle Index Angle 600 r/min
Carriage Travel Distance X1-axis (6.49") 165 mm
X2-axis ( 7.48" ) 190 mm
Z1-axis ( 27.55 ) 700mm
Z2-axis ( 28.34") 720mm
B-axis ( 30.31") 770mm
Y-axis 100 ( 1.96"x2 ) (±50)mm
Rapid Traverse X1-axis 20m/min n
X2-axis 20m/min
Z1-axis 40m/min
Z2-axis 40m/min
B-axis 40m/min
Y-axis 7.5m/min
Turret Number of Mounted Tools Upper Turret 12
Turret Number Lower Turret 12
OD Tool Size ( 787" ) 20mm
Boring Bar Diameter ( 1.25" ) Φ32mm

Notes

1 Turbo Side Discharge Chip Conveyor
2 Royal Dead-Length S-26 Collet Chucks *Many Extra S-26 & S-22 Collet Pads.
2 Face Tool Blocks – ¾” Shank Tool
2 3 Tool I. D. Tool Blocks – 1” Shank Tools
6 Single Side Single Tool O.D. Tool Blocks ¾” Shank Tools
2 Single Side Double Tool O.D. Tool Blocks ¾” Shank Tools
1 Double Side Single Tool O.D. Tool Block 3/4” Shank Tool
7 Single Tool I.D. Blocks – 1-1/4” Shank Tools
1 Quick Automatic Tool-Setter Top Condition Installed
1 Air Blast Chip Gun
1 LNS S-3 6Ft. Bar feederwith Doosan Universal Barfeed Interface
1 Coolant blower
2 Dual chucking pressure
1 Maximum Quantity Lubrication (MQL)system
1 Rear Collet Parts Un-loader and Conveyor System
2 Proximity switches for chuck clamp detection
2 Pressure switch for chucking pressure checking
Special Note
LNS Quick Load Servo S3 Bar loader Interfaced and Installed.
10 - Total Power Live Tools Included
4 - Additional special Ordered MD Tooling Live Tool holders
3 - Each of Part# 0721225 - Radial, Geared up (1:2) Live tool holder. 12,000 RPM Max.
1 - Each of Part# DWO0020125 - Axial Driven Tool, ER25
Live Tool Unit $2500 each for these 10 Tools.