Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Ganesh
  • Cyclone 32CY
  • Lathe - CNC
  • 32mm
  • 2011
  • C Axis:
  • Y Axis:
  • Number of Axis: Yes
  • Live Tooling:


Main Spindle
Spindle Motor 7.5 HP
Maximum RPM 6,000 RPM
Collet Nose Traub A-32
Maximum Barstock Diameter 1.25"
(1.375" optional)
X-axis Travel 7.28"
Y-axis Travel 19.29"
Z-axis Travel 6.50"
Rapid Travel Speed 1,180 IPM (30m/ minute)
Minimum input unit 50 millionths (0.00005")
OD Turning Tool Positions 6 OD Tools
( 1/2 " or 12mm)
(5-5/8" tool plate available)
ID Turning Tool Positions 5 ID Tools
OD Turning Tool size 1/2 " or 12mm
(5/8" or 16mm Optional)
ID Turning Tool Bore Size 25 mm
Spindle Center Height 38"
Sub Spindle
Sub spindle Motor 5 HP Continuous Duty
(7.5 HP Peak)
Maximum Barstock Diameter 1.25"
Sub spindle RPM 6,000 RPM
X-axis Travel 11.53"
Z-axis Travel 11.61"
Minimum input unit
50 millionths (0.00005")
ID Turning Tool Bore Size 25mm
Live Tooling
Cross slide live tools 4 Cross slide live tools
Front slide live tools 3 Front slide live tools
Live tool collet size ER-20 collet, 1/2 " (13mm)
tool shank capacity
Max RPM for live tools 4,000 RPM
Machine Dimensions 95"x60"x76"
Weight 8,360lbs (3800kgs)


Equipped With:
Mitsubishi / Ganesh 4-Axis Control
Rigid Tapping on Main Spindle
Double-nut NSK ballscrews
Mist buster 500
Edge technologies Patriot 338, 8Ft. bar feeder
Small tools box
Phase perfect 70Amp phase converter
Line input transformer
7/8 Traub main chuck collet now
21 live tool collets of various sizes
15 static tool holders
1 Ntk, and 3 Iscar cutting tools with 10 inserts’ ea.
30 new assorted carbide, mills, drills, and solid cutters
25 gallons assorted machine fluids, Mobil, Blaser
Separate Partmaker 2011 software with full simulation and custom post for 32-CY
Used for less than 800 parts
Machine can be seen working near Baltimore, MD
Partmaker 2011 software can be used but no help or updates are available
without a new licence from Delcam / Partmaker
Uses oil-based coolant (standard pressure)