Sold!
Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Tsugami
  • BU 26SY
  • Lathe - CNC
  • 32mm
  • 2004
  • C Axis:
  • Y Axis:
  • Live Tooling:
Tsugami BU 26SY Lathe - CNC 32mm 2004

Specifications

Main Spindle
Bar Capacity: 1.000"
Turning Lengths: 9.842 " per Stroke
Indexing Inccrements: Full C-Axis (.001 deg)
Speeds: 6000 RPM

Sub-Spindle
Bar Capacity: 1.000 "
Speed: 200 - 5000
Drive Motor: 7.3 hp
Index Increment (Degrees): Full C-Axis (.001 Deg)
Axis Specifications
STD. Number of Axes: 8
Axis/ Travel/ Traverse rate/ Feed rate
X1 (STD.) 1.378 Inch 472 IPM 236 IPM
Z1 (STD.) 9.842 Inch 944 IPM 236 IPM
C1 (STD.) 360.000 Deg.
Y1 (STD.) 9.448 472 IPM 236 IPM
X2 (STD.) 4.330 Inch 472 IPM 236 IPM
Z2 (STD.) 5.511 Inch 944 IPM 236 IPM
Y2 (STD.) 3.149 Inch 393 IPM 236 IPM
Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM

Live Tool Speed: 5000 RPM
Live Tool Motor: (HP): 15.0

Type/ Gang-Slide/ Turret
-Max. number of tools
Turning 7 8
Rotary 2 4
Square 0.500 "
Round 0.750 " 1.000 "
Rotary 0.250 " 0.500 "
Rotary tooling
Horse power .7 1.9
Speed 8000rpm 5400rpm
There are a number of tools offered that allow for 2 - 4 tools on one holder

On-Center Mill Drill Standard with 'C' Axis
Off-Center Mill Drill Standard with 'Y' Axis

Machine Net Weight: 13200 lbs
Floor layout: Length: 137 " x Width: 80 " x Height: 69

Notes

Machine includes all Static ID/OD Tooling, (1) 3233-Y310 cross drill for
X-axis, (1) 3233-Y490 double cross drill with one facing the main and one
facing the sub for Z1 and Z2 axis, REM Cool Hi-Pressure Coolant System, Royal
Mist Collector, Chip Conveyor & Parts Conveyor, Manuals, Iemca Trilogy Bar
Feed

Very Low Usage:
Operating Time = 5,500 hours (approx)
Cutting Time = 4000 hours (approx)