Bowden CRB-75 Cabinet Stlye

Specifications

Model Number: CRB-3-75
- 3 stage, wash, rinse, and dry Bowden part washer
- Allen-Bradley PanelView 550 touch-screen programmable controller (PLC)
- Basket dimensions: 18" L x 11.5" W x 6" H
- Utilizes patented Liquid Turbo-Charger technology
- Includes built-in coalescer and chip remover
- Cabinet style provides small foot print on floor
- Installed new in 1998 and used until May 2009
- Unit is under power on our floor and available for inspection
- Original manuals will be included
Overall Dimensions: 6.3' long x 4' wide x 8.2' high
Wash Tank
Fluid Capacity: 75 gallons when filled 4" from top
Temperature Control: Omron digital controller with RTD sensor
Rinse Tanks
Fluid Capacity: 25 gallons
Rinse Pump: 16 hp, 1 phase, 120 volts, 60 Hz, SS
Belt Skimmer: Model MSA, Mini skimmer
Motor: 1/100 hp, 120 volt single phase
RPM: 1
Belt: Stainless Steel
Turbo-Charger: Model A-23
Motor: 1.5 hp, 208v/3 phase, 60 Hz
RPM: 1725
Dryer
Size: 47" L x 32.25" W x 56" H
Cabinet: 11 ga stainless steel, galvanized steel
Motor: 1.5 hp, 208v/3 phase, 60 Hz, ODP, 1745 rpm
Temperature Control: Digital indication electro-mechanical
Chip Remover: Model CRS-2
Motor: 2 hp, 208 volts, 3 phase, 60 Hz, 3450 rpm, 56 J, ODP
Pump: Gorman-Rupp
Housing: 304 stainless steel
Strainer Basket: 304 stainless steel
Filter Unit, Wash Tank
Filters: bag filters, 50 micron, polypropolene
Temperature: 200 degrees F
Filters, Rinse, and Rust Inhibit: Sethco, 50 micron filters
Rotating Rack
Load Capacity: 300 Lb
Hoist
Motor, Hoist: 1/2 hp, 208/3
Load Capacity: 1/2 ton

Notes

- Loading/rinsing/drying cabinet in center of unit
- Variable-speed rotator, inside the cabinet, for holding and rotating standard parts baskets
- Hoist above the rotator, for automatically immersing the parts and lifting them for drying
- Electrically heated forced-air dryer, behind the cabinet
- Allen-Bradley PanelView 550 touch-screen programmable controller (PLC). 7-day heater timer, temperature controllers, and E-Stop button
- Immersion wash tank directly under the cabinet with a patented Liquid Turbo Charger
- Electric fluid heater in each tank to maintain fluid temperature
- Built-in coalescer behind immersion tank to remove oil emulsion from wash fluid
- Chip remover and bag-filter unit for the immersion tank to remove chips and fines
- Filtered, in-tank pump for rinse tanks
- Oil skimmer for each rinse tank
- Automatic recharge, refill, and purge systems