- Bufolli
- 2D/TRD10/10/2BAR
(1986 - machine
information
Photo
Gallery
reconditioned 1997 RUNS
SIMPLE THREADED PARTS IN 1.5
SECONDS - (10)
station "Buffoli Trans-Double" rotary transfer machine
with bar feed, chip conveyor New
machine information
-
- Buffoli
Transbar (2001)
- Diedesheim
- AM-II
Diedesheim new
1978 - located in Europe
- AM-II
Diedesheim
New 1974 in England
-
- AM-III - 70's model
machine available in the USA. - contact us for
details
- Eubama
-
- Eubama S.8 new
1973
- Gnutti
-
- Gnnutti
Model FMF-9-125 (1974)
- Hahn
& Kolb
-
- Hahn & Kolb TC3-9 - two available
- Hydromat
- Hydromat
HW
25-12 New
2006
- Hydromat
HW25-12
(1999)
All CNC Machine - This machine has all large CNC units
that will fit the 45-12 or 45-16. Why not update your
non CNC machine, put the old heads back on this and
have a valuable machine left to resell.
- Hydromat
HW
25-12 New
1982 - very nice machines
-
- (3) 45-12 machines with Robot loaders or bar feed
New 2002
- Hydromat
HB
32/45-16
(1994) New Style - collet chucks, lots of heads -
horizontal and vertical 20m cycles Very Good
Condition
- Hydromat
HB
45-12 new
1993 with Bar Feed and Collets Very Good
Machine
-
- Bar Feed
Iemca
HSL 16 from
a 1995 45mm machine
- Hydromat
CNC
Unit - Like New
-
Ten
Station Hydromat Machines
- Hydromat
Pro-20
New 1997
- Hydromat
Pro-20
new 2000 Like New Machines - two available
- Hydromat
Pro-20
1998 well equipped
-
Twelve
Station Hydromat
Machines
-
- Hydromat
HW25-12
(1999)
All CNC Machine
-
- Hydromat HW25-12 (1994)
Lots of extra's
- Hydromat
HW25-12
(1985)
Low cycles in Canada
- Hydromat
HW
25-12
(1991) CNC -
super shape
- Hydromat
HW
25-12
(1991) ONLY
6 million cycles
- Hydromat
HW
25-12
(1991) ONLY
6 million cycles
- Hydromat
HW
25/12 (1999
and 2000) Only - 1.5 million Cycles
- Hydromat
HW
25-12 (1995)
- 8 million cycles - very good condition
- Hydromat
HW
25/12 Good
shape 30 million Cycles
- Hydromat HB45-12
Rebuilt
2003
- Hydromat
HB
45-12 new
1993 with Bar Feed and Collets
- Hydromat
HB45-12
New 2000 bar
feed and outward facing chucks
- Hydromat
HS-45-12
- 1997 HS
Model with upward facing chucks and spindle
orientation
-
Sixteen
Station Hydromat Machines
- Hydromat
HB
32/45-16
(1982) milling, drilling cross drilling
machine
- Hydromat
HB
32/45-16
(1998) collet chucks, magazine feeder
- Hydromat
HB
32/45-16
(1992) collet chucks, lots of heads
- Hydromat
HB
32/45-16
(1994) collet chucks, lots of heads - horizontal and
vertical 20m cycles
- Hydromat
HB
32/45-12
(2002) with Robot Loader
- Hydromat
HB
32/45-12
(2002) with Bar Feed
- Hydromat
HS-32/45-16
- New 2000 Indexing fixtures - excellent
condition
-
Trunnion
Type
- Hydromat
VM-
- Hydromat V-8 in
Canada waiting for details
- Hydromat
VM-12
(1991 rebuilt 1996)
- Hydromat
VM-16
(1992) (2000)
with bar feed - very good condition - reasonably
priced
-
-
-
-
-
-
-
-
-
- Kingsbury
-
- Kingsbury Rotary
transfer 10 Station Double
Indexing -
just reconditioned
-
-
-
-
- MSO
-
-
-
-
- Namco
(Trunnion)
-
- Namco NAD
4 Trunnion machine (2001) - up to 1.10" machining
- Mikron
Haessler
- 50.08
- two Chuckers
- Mikron
MultiStar
CX-24 new
1996 - hardly used
- 50.10
two jaw chucks
(1985) - indexing fixtures
- Mikron
50.10 (1979)
- 50.018 Three
Machines available
- 50.012
1992 - Two jaw chucks
- 50.12
- Hilti Machines - these machines are in storage and
must
be sold immediately
- parts, heads or the whole machine.
- 60.012 Mikron (1993
rebuilt 2003) Iemca Magazine Loader
-
-
- Osako
- Two
Trunnion type Osako
machines
available in very good condition - two jaw
chucks
-
- Porta
- PORTA
Flexicenter
M-04-03;
2005
-
-
- Riello
- Trunnion Type RL-09
- 7 station - tooled for steel elbows - two elbows at
once
- Riello Transfer
Machine CNC upgrade 1997
-
- Rismatic
- 12 Station machine
available in the USA. Contact us for
details
- 8 Station Model
152LN 8
- Rismatic
Model 154-G-12-F48 CNC
-
-
- Tonshoff
- Tonshoff
DAF
14-6
machines available - new 1984
-
- Turmat
- Triflex model -
machines 12" parts Flex is state-of-the-art in CNC
rotary transfer technology ideal for medium-to-high-
volume batches, plus the flexibility to machine a wide
variety of components, materials and configurations,
up to 12" (300mm) workpieces. - two
available.
- Two
Model 28/80-R4
8-Position Automatic Rotary Transfer Machines new 1995
-
- Wirth
& Gruffat
- Wirth & Gruffat
C-128 Convertibles - very nice machine New
1999
|
|
