Condition: Used-Good

Detailed Description:
Nakamura-Tome TW-30
Two Spindle Opposed 2-Turret Multi Axis Turning Center W/ Live Tooling
Model: TW-30
Serial Number: W30701, Year Manufactured: 1991

EQUIPPED WITH

Fanuc OTT CNC Control
(2) 10" 3-Jaw Power Holding Chucks
Parts Catcher
FMB Turbo 12 Ft. Bar Feed, Model Turbo 4000/1700 LMS
Chip Conveyor


Catalogue Specifications: Subject to Verification

CAPACITY
Round Collet Capacity: 2.5"/64mm - Left Unit, 2.5"/64mm - Right Unit
Chuck Diameter: 10"/254mm - Left Unit, 10"/250mm - Right Unit
Swing Over Slide Covers: 11.02"/280mm - Left Unit, 11.02"/280mm - Right Unit
Swing Over Saddle: 11.02"/280mm - Left Unit, 11.02"/280mm - Right Unit
Turning Diameter: 11.02"/280mm - Left Unit, 11.02"/280mm - Right Unit (toolings limited)
Turning Length Standard: 7.87"/200mm - Left Unit, 7.87"/200mm - Right Unit
Turning Length Maximum: 11.81"/300mm - Left Unit, 11.81"/300mm - Right Unit (toolings limited)
Distance between Main Spindle Nose and Turret Face
Maximum: 19.09"/485mm- Left Unit, 19.09"/485mm - Right Unit
Minimum: 5.31"/135mm - Left Unit

MAIN SPINDLE
Drive Motor Continuous/50% ED: 15/20 HP, 11/15 kW - Left Unit, 10/15 HP, 7.5/11 kW - Right Unit
Speed Range: 35 - 3500 RPM - Left Unit, 35 - 3500 RPM - Right Unit
Designation: RPM Direct Designation
Spindle Nose: A1-8 - Left Unit, A1-8 - Right Unit
Hole through Spindle: 3.15"/80mm - Left Unit, 3.15"/80mm - Right Unit
Hole through Draw Tube: 2.56"/65mm - Left Unit, 2.56"/65mm - Right Unit
Center Height from Floor: 44.69"/1135mm - Left Unit, 44.69"/1135mm - Right Unit

SADDLE
Configuration: 45 Slant Bed
Effective Slide Travel
X-Axis: 9.05"/230mm - Left Unit, 9.05"/230mm - Right Unit
Z-Axis: 13.77"/350mm - Left Unit, 13.77"/350mm - Right Unit
Rapid Traverse
X-Axis: 472 IPM, 12m/min. - Left Unit, 472 IPM, 12m/min. - Right Unit
Z-Axis: 708 IPM, 18m/min. - Left Unit, 708 IPM, 18m/min. - Right Unit

Distance between Slides
X-Axis: 12.20"/310mm - Left Unit, 12.20"/310mm - Right Unit
Z-Axis: 16.73"/425mm - Left Unit, 17.51"/445mm - Right Unit

TURRET
Tooling Clearance: 27.55"/700mm - Left Unit, 27.55"/700mm - Right Unit
Number of Tool Stations: 12 - Left Unit, 12 - Right Unit
Tool Size
Square: 1" x 1"/25mm x 25mm - Left Unit, 1" x 1", 25mm x 25mm - Right Unit
Round: 1.57"/40mm - Left Unit, 1.57"/40mm - Right Unit
Indexing Drive with Direct Logic: Gear + Hydraulic Motor - Both Units
Turret Clamping Force: 11,000 lbs./5000 kg - Both Units

DIMENSIONS
Machine Dimensions - Less Conveyor
Length: 169.21"/4298mm
Width: 80.83"/2053mm
Height: 84.65"/2150mm
Approximate Weight: 17600 lbs./8000 kg



*****Machine was only used for aluminum machining in the medical field.