Condition: Used-Very Good

Price: 184500

Detailed Description:
MORI-SEIKI ZL-25MC/1000 4-AXIS TURNING CENTER
(PRELIMINARY SPECS)

Serial # 159 New 1996 Model # Zl-25MC

Swing Over Bed: 20.5"
Swing Over Cross Slide: 13.8"
Center Distance: 45.1"
Maximum Turning Diameter: 13.4"
Standard Turning Diameter: 9.1"
Maximum Turning Length: 40.6"
X-Axis Travel, Turret #1: 11.3"
Z-Axis Travel, Turret #1: 42.9"
X-Axis Travel, Turret #2: 5.7"
Z-Axis Travel, Turret #2: 42.9"
Spindle Speeds: 35 to 3500 RPM
Spindle Nose: JIS A2-6
Hole Through Spindle: 3.1"
Spindle Bearing I.D.: 5.1"
Upper Turret Tools: 12 (6 Live Tool Positions)
Lower Turret Tools: 8 (No Live Stations)
Shank Height for Square Tools: 1"
Shank Diameter for Boring Bar: 2"
Turret Index Time: .7 Seconds Per Station
Live Tool Speeds: 80 to 2000 RPM
Rapid Feed Rate, X-Axis: 472.4 IPM
Rapid Feed Rate, Z-Axis: 590.6 IPM
Cutting Feed Rate Per Revolution, X-Axis: Up to 9.8"
Cutting Feed Rate Per Revolution, Z-Axis: Up to 13.7"
Jog Feed Rate, X & Z Axis: 50 IPM
Tailstock Travel: 42.9"
Tailstock Quill Diameter: 4.3"
Tailstock Quill Taper: #4 Morse
Tailstock Quill Stroke: 3.9"

EQUIPPED WITH:
MSC-516 Control
Upper Turret Live Tooling with Full C-Axis Spindle
LNS Hydrobar Sprint Bar Feeder: 12' Bar Capacity x 1/2" - 3-1/8" Diameter
Assorted Feed Tubes & Bushings for Bar Feeder
Parts Catcher
Exit Conveyor for Parts Catcher
Full Length Chip Conveyor
Cool Jet High Pressure Coolant System, Model # 70-30SF
Discharge Pressure: Up to 1,000 PSI
Tool Presetter
Collet Chuck
Assortment of Tooling
Manuals
Approximately 9,800 Hours Cutting Brass
18.5 KW Motor, 30 Minute Rating

Machine Size: 203" L-R x 84" F-B x 84" H x 19,100 Lb.
Bar Feed Size: 180" L-R x 48" F-B x 48" H

PRICE: Loaded on Truck