OttoMatics Inc.
4313 N. Smoke Ridge Ct. N.E., Roswell, GA 30075
(770) 928-6599 Fax (770) 804-2008
Hydromat 45mm HS-12 new: 1997
1997 machine -
see photo's below
5million cycles
1996 machine
- SOLD
(1) BASIC machine HS 12 consisting of heavy duty cast iron with 12 horizontal hand scraped
tool spindle mounting ports on a reinforced welded base with Dyad vibration damper. High
precision hydraulically actuated indexing table With 12 chucks. Table indexing and location
provided by Hydraulically actuated rack and pinion and Hirth type multi-toothed coupling.
Repeatability accuracy.0002". Control feature allows table to be half-indexed to provide ease
of tool change.
(1) Hydromat standard electrical control cabinet with G.E. 90 30 Programmable Controller and I EC motor starters.
Machine voltage: 460 volts, 3 phase, 60 cycle unless otherwise specified. Control Voltage: 115 Volts A.C. and 24 Volts D.C..
In order to provide tool spindle interchangeability, line protection provided.
(1) Swiveling pendant operator control including message center consisting of a two line display to provide the operator with
total machine control from any location around machine.
(1) Fluorescent machine light.
(1) Lexan chip guard and ring to enclose machine tooling area.
(1) Hydraulic power unit with 50 gallon (approximate) reservoir to provide hydraulic fluid for machine operations. Automatic
heating cycles assures consistent operation and the accumulator maintains constant pressure.
(1) Set of Hand Tools
(1) Aluminum Lid Cover
(1) Coolant tank/conveyor system dual filter 400 gallon (approximate) coolant reservoir with automatic chip conveyor,
magnetic and bag filter system with magnetic separator and two separate bag filters used for filtering coolant supplied to collets.
(10) Index drives for chucks (complete).
Equipped with Bar feeder HS Machine 12 ft.
Power Rating 3-Phase 460 Volts 60-HZ
Power Consumption 50 Full Load Amps
Number of Stations 12 Horizontal
Chuck Capacity 4" cube 1 3/4" round
Work Piece length 8" Max
Hydraulic Tank Cap 50 gallons
Hydraulic Pump Cap 9 GPM
Total Wt of Machine 18,500 lbs.
Bar Feeder Magazine
Max Bar Stock Length 12 ft
Max Bar Stock Diameter 1 3/4"
Max Capacity of 1" Bars 8 Pieces
Feed-in Rate I" in .2 see.
Weight 500 lbs.
Combined Chip Conveyor/Coolant Tank
Coolant Tank Capacity 400 gal
Coolant Pump Capacity 148 GPM
Weight 1500 lbs.
(2) Drill detectors, BK4 for station 7.
(3) Unipower HPL tool monitoring system to monitor tool wear, breakage, and missing tool
(not including VGA monitor). For stations 4, 5, and 6.
(3) Durant pre-settable tool protection counters model 4561
(1) Set of spare parts.
(1) Installation at Buyer's facility (5 days).
(1) Set of cutting tools.
(1) Packing and shipping preparation
(1) Engineering.
(1) Machine prepared for production using standard cutting oil.
(1) Additional Oil Pump.
(1) Steel operator's platform deluxe around machine elevated for easy access to tooling area.
(12) Sets of chuck jaws (1 pair).
(12) Top jaws, 2nd part.
(1) 12' automatic bar feeder magazine with bar separator and electronic bar change maintains separation
between bars on feed tray to ensure smooth bar feeding action when using large diameter stock. 8 bar
capacity tray based on 1 3/4' diameter stock.
(1) Cut off unit AE 250 QC. AE 250 with Valenite Quick-Change.
(1) Rear slide assembly-
(1) Guide bushing round
(1) Guide tube (3 pcs.)
(1) Unload unit
(5) Tool spindle units VE 20/80 ( two preloaded thrust bearing design with 20MM spindle, 80MM
stroke) hydraulically actuated tool spindle quill with AC motor drive and modular plug in.
Spindle speeds to 6750 RPM easily changed by pulley replacement to timing belt- Feed rates
are infinitely variable by adjustment of hydraulic control valve. Maintenance free design.
(2) 2 right adjustable flanges.
(2) 2 left adjustable flanges.
(8) Drill heads DH 82/25 hardened and ground used with tool spindle unit 20/80 and tool holder
collet ER 25 size.
(1) Tool spindle unit VE 30/60 ( two preloaded thrust bearing design with 30 MM spindle, 60MM
stroke) hydraulically actuated tool spindle quill with AC motor drive and modular plug in.
Spindle speeds to 5,000 RPM easily changed by pulley replacement to timing belt. Feed rates
are infinitely variable by adjustment of hydraulic control valve. Maintenance free design.
