Sold!
Buy one like this

I want to sell a machine like this

  • CNC Machine
  • Mori-Seiki
  • NL-2500S MC-700
  • Lathe - CNC
  • 3.1"
  • 2005
  • C Axis:
 Mori-Seiki NL-2500S MC-700 Lathe - CNC 3.1

Specifications

Swing Over Cross Slide: 29.7"
Maximum Diameter Turned: 14"
Standard Diameter Turned: 10.8"
Maximum Length Turned: 27.7"
Distance Between Centers: 27.5"
Spindle Speed of Main Spindle: Up to 4000 RPM
Maximum Spindle Torque: 441.8 Ft./Lbs.
Main Spindle HP: 24.7 Horsepower Intermittent & 20 Horsepower Continuous
Spindle Nose: A2-8
Spindle Hole: 3.6"
Bar Capacity: 3.1"
12-Position Tool Turret with .25 Second Index Time
X-Axis Turret Vertical Travel: 10.2" with Maximum Feed of 1181 IPM
Z-Axis Turret Longitudinal Travel: 31.3" with Maximum Feed of 1181 IPM
C-Axis Chuck Rotation, Minimal Programmable Indexing Angle: .001 Degrees
M-Axis Milling
B-Axis Sub-Spindle Longitudinal Travel
Sub-Spindle Speeds: Up to 6000 RPM
Sub-Spindle Rotational Torque: 57.4 Ft./Lbs.
Sub-Spindle HP: 15 Horsepower Intermittent & 10 Horsepower Continuous
Live Tooling Speeds: Up to 6000 RPM
Live Tooling HP: 7.5 Horsepower Intermittent & 5 Horsepower Continuous
Live Tooling Rotational Torque: 29.5 Ft./Lbs.
Maximum Face Mill Diameter: 3.1"
On Hours: 7177
Cutting Hours: 1473
Operational Time: 3,642 Hours

Notes

EQUIPPED WITH:
Mori Seiki MSX-850BM CNC Control
RS232 Port
Machine Wired for 3 Phase, 60 Cycle, 220 Volts
Scales on X & Z Axis
Hard Box Ways
Auto Lube System
Tool Presetter
Parts Catcher
10" Kitagawa 3-Jaw Power Chuck
6" Kitagawa 3-Jaw Power Chuck, Sub-Spindle
(12) Turret Tool Holders
(2) Boring Bar Holders
(4) Turning Tool Holders
(3) Parlec OD Live Tool Holders, Model #T32206
(3) Parlec Live Double Sided Face Tool Holders, (1) Model #32207 & (2) Model #32216
All Live Tool Holders Rated for 6000 RPM
Foot Pedals to Operate Both Chucks
Coolant Tank & Pump

FMB Bar Feeder, Serial #25-250013, New 2005, Model #FMB SL 80S/1200A
Bar Diameter: 10 MM Minimum to 80 MM Maximum
Feed Force: Infinitely Variable
Insertion Speed: 0 to 700 MM/Second
Feed Speed: Up to 1000 MM/Second
Maximum Bar Length: 1200 MM

DIMENSIONS:
Overall Machine: 120" L x 78" W x 84" H
Machine Weight: 12,500 Lbs.
Bar Feed: 66" L x 51" W x 51" H
Coolant Pan & Pump: 106" L x 59" W x 20-1/2" H
(9) Leveling Jacks to Sit the Machine On