Sold!
Buy one like this

I want to sell a machine like this

  • Transfer Machine
  • Hydromat
  • HW 25/12
  • Rotary
  • Chuck Machine
  • 2007

Specifications

Hydromat Information = HB25-12
(With chucks and Collets)
Current Setup -4 vertical stations/ 8
horizontal
Max stock size
Round = 1",
HEX= 7/8",
SQ.= 3/4",
LENGTH=4"
12 ft. Electronic Barfeeder
1 Cutoff unit 160 QC.GB
11 Toolspindles VE-26/80 units
1 Electric/Hydraulic Inverting unit
A quickpanel pendant control with keypad
Knoll vacuum rotation bagless coolant filter system
HPU9191-5 Hydraulic power pack. 50Gal. reservoir.

Notes

450 gallons (approximate) coolant reservoir with vacuum drum to separate
floating chips and fines. Automatic chip conveyor equipped with standard hinged scraper
chip conveyor.
1 High Pressure Coolant Pump
required when up to six (6) coolant fed toolspindle units are employed.
1 12' Automatic Bar Feeder Magazine with Electronic Bar Change
10 bar capacity tray based on 1" diameter stock.
1 Bar Alignment Guide
13 Sets of Chuck Jaws (1 Pair) with inserts
1 Ejectors Heads, Additional (Set of 13)
1 Cut Off Unit AE 160 QC GB (Gear Box)
a heavy duty 2-speed cut off saw that functions with arc cutting action using a
160mm (6.3") saw blade. Unit is equipped with a 2-speed gear box transmission
providing high/low (7:1) simple speed change capability. Basic speeds are established by
easily changed pulley replacement providing four speeds per pulley set. Feed rates are
infinitely variable by adjustment of hydraulic control valve. Saw arbor incorporates quick
change tool system for rapid changing of saw blade.
1 Electric Motor Including Flange
1 Aligning Device for Extruded Material
1 Inverting Unit WDE 20 w/Electronic Control
an electronically controlled unit for piece part inverting end for end. Electronic
control provides additional pressure sensitivity when relocating part against a critical part
feature. Independent electronic signaling facilitates the performance of vertical operation
in the invert process. Electronic controlled inverting is required for machines with chuck
clamping. Capacity 3/4 " diameter x 4" length.
1 Inverting Bushing Extruded
10 Toolspindle Units VE 26/80 FQ
a maintenance-free designed toolspindle unit equipped with a flanged quill for
mounting flange type tool heads. Unit consists of four preloaded thrust bearings with
26mm spindle, 80mm stroke, a hydraulically actuated toolspindle quill with AC motor
drive and modular plug in. Spindle speeds to 5,050 RPM easily changed by pulley
replacement to timing belt. Feed rates are infinitely variable by adjustment of hydraulic
control valve.
4 Milling Heads FK 26-4 (FQ unit)
shank mounted cutter. Maximum cutter size 4" diameter.
Head is flange mounted on 26 series FQ type toolspindle unit.
6 Cross Drilling Heads QBE 261/11 1 Spindle (FQ unit) - only (3) are on the machine - where are the others.
for cross machining operations from horizontal position. Head consists of one
QBE20 series drill head attached to a single position mounting flange. Head assembly is
flange quill mounted on VE 26/80 FQ toolspindle unit. Head is equipped for use with
quick-change style QBE ER 8 or ER 11 drill holders.
6 Drill Holders QBE ER 11
a quick-change style holder & collet (shank range 0.5-7mm).
6 Multi Step Valves MSV 100
hydraulic valve for 2-step machining operations.
10 Radially Adjustable Flange
flange plate for radial adjustment of toolspindle units equipped with milling,
cross-drilling or multi