Sold!
Buy one like this

I want to sell a machine like this

  • CNC Multi Spindle
  • Index
  • 1-1/4 MS-32b
  • Multi Spindle Bar
  • 32mm
  • 1999
  • Spindle Size: 32mm
 Index 1-1/4 MS-32b Multi Spindle Bar 32mm 1999

Specifications

CAPACITY:
Max. bar dia. with feed finger ............ 32 mm
Spindle pitch circle dia .... 270 mm
Spindle carrier indexing .. 0.95 sec
WORKSPINDLE:
Power clamping by INDEX-spring loaded-hollow
chucking cylinder and draw type collet
Max. clamping travel ..... 3 mm
Operating force ............16.5 kN

DRIVES:
Main spindle drive:
Hollow shaft A.C. motor with infinitely variable speed for each spindle
Nominal rating ....... 4 kW
Nominal speed ....... 2500 min
Torque .. 15. 3 Nm
Rating at 16% duty cycle and
2500 min ........ 8.2 kW
Torque at 16% duty cycle and
2500 min ......... 31.3 Nm
Max. speed ............. 6300 min
A.C. motor with infinitely variable speed
Nominal rating ........ 3.75 kW
Nominal speed ........ 6000 min
Drive for synchro spindle::
A.C. motor with infinitely variable speed
Nominal rating ........ 3.75 kW
Nominal speed ........ 6000 min
Torque ................. 15.3 Nm
Rating at 25% duty cycle ........... 10 kW
Torque at 25% duty cycle .......... 16 Nm
Max. speed ........... 6300 min
TOOL CARRIER:
Max. number ................ 12
CROSS SLIDE UNITS:
Max. number ................ 10
Cross travel (X) ..... ..... 68 mm
Longitudinal (Z) ..... ..... 100 mm
Max. feed force X ............... 5.5 kN
- X ................ 5.5 kN
Z ................. 5.5 kN
- Z ................ 5.5 kN
Rapid traverse .............. 12 m/min
LONGITUDINAL UNITS:
Working travel (Z) ......... 100 mm
Max. feed force Z . 5.5 kN
-Z . 5.5 kN
Rapid traverse ........ ...... 12 m/min

Notes

Machine has less than 10,000 hours run time.
SYNCHRO SPINDLE:
Max. clamping diameter .. 32 mm
Clamping travel ........... 3 mm
Operating force ............. 10.8 kN
HYDRAULIC SYSTEM:
System pressures: low pressure ......60 bar
high pressure ..... 90 bar
Max. pump delivery: pump LP .......... 25 l/min
pump HP .......... 11.9 l/min
Power consumption: .......6 kW
COOLANT SYSTEM:
Pump delivery ............... l/min
Delivery pressure ........... 2.2 bar
Power consumption ........ 3 kW
OPERATING MEDIA & CAPACITIES:
Hydraulic oil H-LPD 32 ............... 150 l
Coolant SL222 ...46 ............. 825 l
DIMENSIONS:
Floor space requirement of machine ..... m
Length .......... 2415 mm
Width ........... 1520 mm
Height ........... 2390 mm
Total height .... 7000 mm
Total width ..... 1780 mm
WEIGHTS:
Machine total .. 6000 kg
Bar guide ........ 600 kg