Sold!
Buy one like this

I want to sell a machine like this

  • CNC Machine
  • Mori-Seiki
  • NT3150DCG/500CZ
  • Lathe - CNC
  • 2008
  • Spindle Size: 2"
  • B Axis:
  • C Axis:
  • Y Axis:
  • Sub Spindle:
  • Live Tooling:
  • Dual Turrets:
 Mori-Seiki NT3150DCG/500CZ Lathe - CNC  2008

Specifications

· Chuck Size (Std / Opt): 6" / 8"
· Maximum Swing: 23.6"
· Turning Diameter: 23.6"
· Turning Length: 20.3"
· Bar Capacity: 2"
· Collet Type / Capacity: 3J
Spindle:
· Speed: 6000 RPM
· Nose: A2-5
· Speed Ranges: 1
· Power Rating (Std / Opt): 15 / 20
· Bore: 2.4"
Primary Tool Carrier:
· B-Axis Tool Spindle:
· Max Tools (Turning / Rotary): 80 / 80
· Tool Shank Size (Square / Round): 1" / 1.5":
· Rotary Tool Spindle: 12,000 RPM
· Rotary Tool Spindle (Power): 7.5 HP
Secondary Tool Carrier:
· Turret:
· Max Tools (Turning / Rotary): 12 / 12
· Tool Shank Size (Square / Round): 0.8" / 1.2"
· Rotary Tool Spindle: 6,000 RPM
· Rotary Tool Spindle (Power): 7.5 HP
Travels:
· B1: 240 degrees
· C1: 360 degrees
· X1: 27"
· X2: 5.1"
· Y1: 9.8"
· Z1: 22.4"
· Z2: 18.5"
Rapid Rate:
· B1: 100 rpm
· C1: 400 rpm
· X1: 1968 ipm
· X2: 1181 ipm
· Y1: 1181 ipm
· Z1: 1968 ipm
· Z2: 1181 ipm
General:
· Length: 115"
· Width: 114"
· Height: 99"
· Weight: 27,720 lbs

Notes

· C-Axis
· Y-Axis
· Tailstock with Live Center
· Through Spindle Coolant System
· Chip Conveyor
· Oil Cooler
· Full Indexing Specification
· Programmable Steady Rest
· High Pressure Coolant
· Renishaw MP700 Probe
· 5 Sets of M Codes
· Automatic Tool Presetter
· Tool Life Management
· Data Server with W/711 Control
· 640 Meters of Memory
· 40 PC Runoff for for 2 Different Part
· SMW 2 Jaw Chuck with Actuator
· CB-ND/A5 Collet Chuck
· 200 PSI Coolant Pump
· Hydraulic Vise
· Adapter Plate for Vise to Turret
· Tailstock for Turret
· 1/10 Program Resolutions
· 4475-8594 Hinge RH Conveyor
· Special A25 Adapter P/QT #: 9496
· Drawtube Connector
· MSX-711T3 Control
· Air Vlow System Tool Tip
· Capto-C5 40 Tool ATC