Sold!Buy one like this
I want to sell a machine like this
- CNC Machine
- Eurotech
- Lico LNTS
- Lathe - CNC
- 65mm
- 2002
- B Axis:
- C Axis:
- Sub Spindle:
- Live Tooling:
- Dual Turrets:
Specifications
Capacity: Maximum Work Diameter 2"Maximum Turning Diameter Main / Sub 2" / 2"
Maximum Turning Length 5.12"
Main Spindle: Speeds 45 - 4,500 RPM
Spindle Bore / Bar Cap / Indexing 2.56" / 2" / 360,000°
Motor (30 min. / cont.) 18 / 12 HP
Sub-Spindle: Speeds (Mounted On Turret One) 38 - 3,800 RPM
Spindle Bore / Bar Cap / Indexing 2.56" / 2" / 360,000°
Motor (30 min. / cont.) 7.4 / 5 HP
Turret #1 Number Positions (all can be live) 8 - Station (4 Live)
Turret #2 Number Positions (Back Working) 8 - Station
Tool Slide #1 Number Positions (Compound Slide) 4-Turning, Cut, Thread
Tool Slide #2 Number Positions (Fixed Drill, Bore, Thread, Recessing) 4-Back Working ID / OD
Travels: X-Axis Travel Slides 1, 2, 3 & 4 2.76"
Z-Axis Travel Slides 1, 2, 3 & 4 4.53"
X-Axis Travel Turret 1 / Turret 2 (back working) 6.3" / Fixed
Z-Axis Travel Turret 1 / Turret 2 (back working) 16.5354" / Fixed
Gang Slide Fixed or Live 4 - Station
Rotary Tool Motor 5 / 3 HP
Rapids: Rapid Traverse (X & Z) 590 IPM
Feed Rate (X & Z) 196 IPM
Dimensions: Floor Space (L x W x H) 102" x 82" x 82"
Weight (approx) 7,500 Lbs
Z-Axis Travel (Turret 1 / Compound Slide) 15.8" / 4.53"
B-Axis Travel (sub-spindle) 44.88"
C-Indexing 360,000°
Rotary Tools: Rotary Tool Speed (turret one/ turret two) 35 - 3,000 RPM
Rotary Tool Motor 5 / 3 HP
Rapids: Rapid Traverse (X & Z) 590 IPM
Feed Rate (X & Z) 196 IPM
Dimensions: Floor Space (L x W x H) 102" x 82" x 82"
Weight (approx) 7,500 Lbs
Notes
65MM capacity - New in 2012 Only 1,800 hours on machine Siemens 840D sl Controller 4- Cross-slides (Can have 5 tools in the cut) 8-station back working turret Live Tooling Unattended Ops. package Chip Conveyor/Cart - See more at: http://www.pmpa.org/pmpa-community/material-equipment-exchange/sell-detail-page/lico-lnts-cnc-lathe#sthash.2nShq07z.dpuf