Sold!
Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Hanwha
  • XD38H
  • Lathe - CNC
  • 1.5"
  • 2011
  • C Axis:
  • Sub Spindle:
  • Live Tooling:
 Hanwha XD38H Lathe - CNC 1.5

Specifications

Max Bar Capacity........................ 1.5"
Max Bar Capacity Sub Spindle............ 1.42"
Tapping Capacity on Main................ 0.312"
Front Ejection from Sub Spindle......... 3.0"
Rear Ejection from Sub Spindle.......... 11.0"
Drilling Capacity on Sub Spindle........ 0.393"
Tapping Capcity on Sub Spindle.......... 0.312"
Main Spindle Drive Motor................ 7.5 Hp
Main Spindle Speed...................... 200 to 8,000 Rpm
C-Axis Control Min Prog Angle........... 0.001 Deg
C-Axis Locking Gear..................... Every 1.0 Deg
Z-Axis Stroke........................... 12.5"
Z-Axis Rapid Traverse................... 1,200 Ipm
Z-Axis Motor............................ 2.0 Hp
Sub Spindle Drive Motor................. 3 Hp
Sub Spindle Speed....................... 300 to 8,000 Rpm
Cross Working Spindle Motor............. 1.7 Hp
Cross Working Spindle Speed............. 200 to 6,000 Rpm
Od Tool Positions....................... 5
Cross Mill/Drill Tool Stations.......... 4
Main Id Tool Positions Total............ 7
- Stationary from Main Tool Stand...... 5
- Gear Driven.......................... 2
Sub Spindle Id Tool Positions Total..... 9
- Stationary from Main Tool Stand...... 5
- Stationary Independent from Main..... 2
- Gear Driven.......................... 2
Approx Machine Dimensions............... 65" X 94" X 69"
Approx Machine Weight................... 9,500 Lbs

Notes

Equipped With:
Fanuc Oitd Cnc Control
8 Port 2000 Psi Max High Pressure Coolant -- $12,715 Value
Additional M Code Kit for High Pressure -- $2,000 Value
Hanwha Chip Conveyor -- $6,500 Value
Broken Cut off Tool Detector (Piston Type) -- $2,306 Value
Edge Patriot 338/12' Magazine Barfeed -- $33,395 Value
Firetrace Fire Protection System -- $4,100 Value
Total Replacement Cost in 2011 As Equipped -- $245,416
General Information:
Seven Cutting Axes (X1, Y, Z1, C1, X2, Z2, C2)
V Shape Indexing Main & Sub Spindle for Heavy Milling
Full Stroke Synchronous Rotary Guide Bushing Unit
Full C-Axis Control, Both Main & Sub Spindle
Cross Drilling Unit (4) Stations With Holdersrigid Tapping on All Driven
Spindles (Main, Sub, Cross)
Manual Pulse Generator
Coolant Pump With High Flow Rates
Part conveyor With Part Collection Tray
Parts Separator
Pneumatic Part Ejection & Detection for Front Ejection
Centralized Automatic Lubrication System With Level Detector
Coolant Flow Detector for Safe Unmanned Operation
Tool Area Work Light
Signal Tower (3 Colors)
Work Door Interlocks for Safety
Cutting Oil Tank & Flow Detector
Standard Tooling Package - (5) Turning Stations (5/8" Square Shank), (4) Cross
Drilling/Slotting Stations (Er16), (7) Front Id Post (2 Power Driven), (4)
Back Id Post (2 Power Driven 2 Stationary), (7) Sindle End Er-16 Drill
Sleebves, Er-16 Rego-Fix Collet Set, Safety Door Interlock
Fanuc System Specifications:
Speed & Phase Synchronous Function, Axis Synchronous & Super Impose Control
for Axis Swapping, Increased Axis Servo Motor Power (2 Hp), Rapid Traverse
Rate of 1200 Ipm, Absolute/Incremental Command of All Axes, Automatic Power-
off Function, Background Editing, Canned Cycle for Threading (G32, G76, G92),
Constant Surface Speed Control (G96), Continuous Threading Cycle, Decimal
Point Input, Feed Command by Ipm or Ipr, I/O Interface for Rs232C, Bar Feed
Interface Plug (24 Pin), Inch/Metric Conversion, Jog Feed by Manual All Axes,
Minimum Increment (.001Mm/.0001 Inch), Number of Tool Offsets 32 Sets X 2,
Chamfering and Corner Rounding, Tool Nose Radius Compensation, Absolute
Position Coders, Spindle Speed Synchronous Function, Tape Code Eia or Iso
Automatci, Rigid Tapping Cycle, Canned Cycle for Drilling (G80-G83), Helical
Interpolation, Polar Coordinate Positioning, Crash Protection Using Grids
** in Plant, Under Power, Available for Immediate Inspection & Purchase
Hours As of 3/26/14:
- 2360 Run Time Hours
- 5753 Power on Hours