Sold!
Buy one like this

I want to sell a machine like this

  • CNC Machine
  • Hardinge
  • Conquest TT65
  • Lathe - CNC
  • 2003
  • C Axis:
  • Y Axis:
  • Number of Axis: Yes
  • Dual Spindles:
  • Live Tooling:
  • Dual Turrets:
 Hardinge Conquest TT65 Lathe - CNC  2003

Specifications

(1) Used Hardinge Conquest Twin Turn 65 Twin Spindle,
Twin Live Turrets, Y-Axis Cnc Lathe With Ge Fanuc 18It
Cnc Control, 2-1/2 Bar Capacity
Tk-19531 S/N Tt-193 New 2003
Specifications
Twin Spindles
Spindle Configuration (2X): Ansi a2-6"
Spindle Through Hole: 3.25"
Horsepower – Main (30 Minimum): 25 Hp
Torque Rating: 179 Ft-Lb
Base Speed: 575 Rpm
Horsepower – Secondary (30 Minimum): 15 Hp
Torque Rating: 158 Ft-Lb
Base Speed: 500 Rpm
Speed Range (1 Rpm Steps): 40 to 4000 Rpm
Draw Tube Type: Hydraulic
Draw Bar Force (Maximum): 1,440 to 10,500 Lbs
B65 Collet (Through Capacity): 2.56"
S22 Master Collet (Through Capacity): 2.25"
Turning Length With Collet (Maximum): 17.72"
Hang Weight With Device and Part: 300 Lbs
Axis Specifications
Swing Diameter over Way
Covers (Maximum): 19.45"
Preloaded Ball Screw Diameter
X & Z-Axis: 1.42"
Y-Axis: .98"
Secondary Spindle: 1.42"
Travel (Maximum)
X-Axis: 5.51"
Y-Axis: ± 1.377"
Z-Axis: 17.71"
Secondary Spindle: 20.47"
Ottomatics Inc
Att: John (John@Ottomatics.Com)
Traverse Rate (Maximum)
X-Axis: 590 Ipm
Y-Axis: 236 Ipm
Z-Axis and Secondary Spindle: 1,181 Ipm
Thrust (Maximum - 1 Minute Intermittent
Ratings Shown)
X-Axis: 2,286 Lbs
Y-Axis: 1,175 Lbs
Z-Axis and Secondary Spindle: 2,250 Lbs
Twin Vertical Turrets
Number of Stations: 10
Tool Configuration: Vdi 30Mm
Square Shank Tool Size (Maximum): 3/4"
Round Shank Tool Size (Maximum): 1-1/4"
Live Tooling Capability: All Stations
Tool Shank Diameter W/Er25 Collets: .04 - .625"
Horsepower Rating
(15 Minute Intermittent Ratings Shown): 5 Hp
Torque Rating (15 Minute Intermittent
Ratings Shown): 17.5 Ft-Lb
Speed Range (1 Rpm Steps): 80 to 8000 Rpm
Base Speed: 1,500 Rpm
Indexing Time (Station-To-Station): .6 Second
C-Axis
Speed (Maximum): 80 Rpm
Torque @ 100% Duty Cycle
Main Spindle: 74 Ft-Lb
Secondary Spindle: 22 Ft-Lb
Chip Removal System (Side Discharge)
Variable Feedrate (Maximum): 17.3 Fpm
Belt Width: 10"
General
Compressed Air Requirement: 70 to 90 Psig
Hydraulic Tank Capacity: 40 Us Gallons
Coolant Tank Capacity: 75 Us Gallons
Machine Shipping Weight: 22,300 Lbs
Coolant Tank & Hydraulic Unit Weight: 2,500 Lbs
Electrics: 230 Volts, 3 Ph, 60 Cyc

Notes

Equipped With
Ge Fanuc 18It Cnc Control
Lns Super Hydro Barfeed
B65 Collet Chuck
Twin Turret, Twin Spindle
Through Spindle Coolant on Second Spindle
Part Present Detector on Second Spindle
Y-Axis on Upper Turret
Live Tooling Both Turret With "C" Axis
Chip Conveyor
Parts Catcher – Conveyor Type With Gripper
Miscellaneous Live Turret Tool Holders
Miscellaneous Static Turret Tool Holders
Miscellaneous Collets