Sold!
Buy one like this

I want to sell a machine like this

  • Automatic
  • Davenport
  • HP
  • Multi Spindle Bar
  • 20 mm
  • 2007
 Davenport HP Multi Spindle Bar 20 mm 2007

Specifications

0.875 inch (22.2 mm) round
0.750 inch (19.1 mm) hex
0.625 inch (15.9 mm) squareBar capacity (minimum)
0.187 inch (4.8 mm)Turning length (maximum)
3.0 inches (76.2 mm)Stock depletion sensor
yesBurring spindle sensing mechanism
yesNumber of main (work) spindles
5Main spindle speed range
0-3,800 rpmNumber of independent longitudinal tool stations
5Cross slides
2Tool arms
2Spindle pick-off and deburring
YesSpindle capacity diameter pick-off (maximum)
0.875 inch (22.2 mm)Number of tools servicing pick-off spindle
1 (2 with Two Position Backworking Option)Tooling positions
9 (plus attachments)Spindle indexing time
0.3 seconds minimum variableControl make and model
Davenport Controller
Shop Air Pressure
90 psi (Option Dependant) ( up to 20 cfm)Total power requirement
24,000 WattsClear area required for installation
20’L(609.6cm) x 15’W(457.2cm) x 10’H(304.8cm)Weight & Length InformationMachine weight - 6,100#
9’4”L(284.48cm) x 4’6”W(137.16cm) x 8’10”H(269.24cm)Cucchi Bar Loader weight - 4,000#
18’L(548.64cm) x 2’9”W(83.82cm) x 4’1”H(124.46cm)Stock Carrier Cover weight - 250#
8’6”L(259.08cm) x 19”W(48.26cm) x 21”H(53.34cm)Stock Carrier weight - 225#
10’4”L(314.96cm) x 11-1/2”W(29.21cm) x 11-/2”H(29.21cm)Transformer (if required) weight - 325#
16”L(40.64cm) x 28”W(71.12cm) x 32”H(81.28 cm) Controls Package - 1200#60”L(152.4cm) x 60”
W(152.4cm) x 60”H(152.4cm)Constant Low Pressure Lubricator #SB-2446-1
(Ways and Servo Motors)Required Lubricant
Mobil Vactra (Heavy)Reservoir Capacity
8 LitersLube Pump Output
100 cc/min.Pressure Setting
25-30 psiSystem Voltage
480 V, 50/60Hz 3 Phase, 50 AmpThe Davenport HP is the ideal machine for long or short runs of small parts.
A powerful PLC controller means reduced set-up times and adjustments and allows for operators to concentrate
more on producing parts rather than fine-tuning adjustments.

Notes

Machine Running
http://www.flickr.com/photos/machinetools/8435368439/in/photostream
Cucchi Loading
http://www.flickr.com/photos/machinetools/8435368653/in/photostream
Cucchi Bar Loader
Regular Bed
Machine was purchased in 2007 and has 4,300 operation hours.
Davenport Servo Hp With Cucchi Loader, Pickoff, Back Finish, Servo Threading, Winters Thread Roll, Noise Tamer, Chip Conveyor


after delivery.
O Barrel Chuck
70 AS-111 CE 2005
Chip Conveyor
Rear Tool Arm
Tamer Enclosure
Burring Attachment
Spindle a: 623-SA
Spindle b: 623-3
Spindle c: 1376-31 SA
Spindle d: SB-226-53L-SA
Spindle e: 1263-5-10-SA
Tool Guauge
5080-393 Part Chute with plate
Catch Pan
Cam Fill Collars
High Precision HP Head standard equipment
Faster return on investment due to low machine cost
Fastest cycle times with 0.3 seconds index and programmable index points
More up-time, less maintenance parts. Easy set-up with full enclosure front
and back sliding doors, Spindle speeds infinitely variable from 0-3800 RPM
Servo Threading attachment standard
Simple Servo motion control has up to 6 axes of control and stores 100 job
summaries on board with the ability to import/export to USB memory card
Operator training reduced to a matter of days
Optional web server provides remote machine monitoring
Optional Servo Burring and 2-Position Back Working attachments eliminate
many secondary operationsThe Davenport HP operates with a simple PLC
based control and multiple Servo drive systems that eliminate over 150 parts
from the original, mechanical Model B machine. The results are reduced
set-up times and higher production rates.
Up to 6 axes of control
Stores 100 job summaries on board with ability to import/export to USB
memory card, Easy to learn, Optional web server for remote monitoring
Bar capacity (maximum)