Ottomatics Inc. Machine List

Specifications

TRAUB TNL 26 CNC Swiss-type automatic
lathe including standard equipment
CONTROL
* TRAUB TX8i CNC control system, with
64 bit RISC-High Performance Processor
(90 Mips) with additional PLC High
Performance Processor and integrated
PC
Electrical equipment ready for con-
nection, according to UL standards.
Service voltage 460 V, 60 cycles.
Control voltage 24 V DC. Supply voltage
115V, 60 Hz (only for U.S.A.)
Colour:
Machine and switchgear cabinet are
painted dust grey RAL 7037; covers are
painted light grey RAL 7035
2 sets of user documentation in one of
the main official languages (German,
English, French) or an agreed language
that is available. Parameter data on
floppy disk.
AUXILIARY EQUIPMENT:
For main spindle:
C axis, electric, resolution 0.001 deg.
Change parts for TNL26 main spindle,
for positive-opening collet
(F30 No. 76/63), as per TRAUB
specification 981825,
max. bar dia. 26 mm
Change parts for main spindle (TNK36)
and counterspindle (TNK36/TNL26) for
positive-opening collet
(F30 No. 76/63), as per TRAUB
specification 981825,
max. bar dia. 26 mm
Mounting for T 227 programmable powered
guide bush as per TRAUB specification
986761, max. bar dia. 26 mm,
stroke 225 mm, incl. coupling
(requires drive unit 984160)
Electrical/pneumatic control unit
for programmable powered guide bush
no. 986760
Counterspindle:
Motorised counterspindle incl. hollow
clamping and locking units as well as
Z4 slide unit; speed as main spindle,
power 6.7/10.7 KW
C axis, electric, resolution 0.001 deg.
Clamping pressure reduction unit for
counterspindle, can be operated via
M function
(only for use with collet clamping,
for clamping pressures 20-40 bar)
Workpiece ejector unit for
counterspindle, hydraulic, incl.
ejection check and flush-cleaning of
collet chuck through spindle
Lower tool carrier, X1/Y1 axis,
for 12 tools;
(included in TNL26 standard equipment)
Tool drive unit for lower tool carrier
carrier as individual drive for up to
12 rotating tools mounted in turret
head, AC drive
Upper tool carrier
incl. X2/Y2/Z2 axes for TNL26,
incl. X1/Y1/Z1 axes for TNK36,
for 12 tool mountings
Tool drive unit for upper tool carrier
as individual drive for up to 12
rotating tools mounted in turret head,
AC drive
Electronic transmission for polygon
turning, thread cutting and gear
cutting, incl. position reference,
fitted in upper tool carrier;
(for gear cutting the gear cutting
attachment 984538 is required)
X3 cross-axis for front end machining
unit/counterspindle (indispensable for
front end machining unit)
Front end machining station, 5 tools,
incl. Z3 slide unit, for tool drive unit
984037 or 984038
(to be used with X3 slide unit)
Tool drive unit designed as common
drive for up to 4 rotating tools
mounted in 5-station front end
machining unit; 3-phase AC motor
Speed max. 6000 rpm
Power output 2.0/5.5 kW
Rear end machining station (5 tools),
X4/Y4 axes, for tool drive unit
984031 or 984032
Tool drive unit designed as common
drive for up to 4 rotating tools
mounted in 5-station front end
machining unit; AC motor
Speed max. rpm 6000
Power output kW 2.0/5.5
Workpiece removal units:
Workpiece removal unit fitted with
swivel gripper; conveyor belt removes
work to the left front side of the
machine
(for use with counterspindle 983186
and X3 axis 983132)
(removal of work outside the machine
to be provided by customer)
Set of steel gripper jaws 8-20 mm dia.
Set of steel gripper jaws 20-36 mm dia.
Set of plastic POM gripper jaws
8-20 mm dia.
Set of plastic POM gripper jaws
20 - 36 mm dia.