Sold!
Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Tsugami
  • BU 26Sy
  • Lathe - CNC
  • 26mm
  • 2006
  • C Axis:
  • Y Axis:
  • Live Tooling:
 Tsugami BU 26Sy Lathe - CNC 26mm 2006

Specifications

Cnc Control: Fanuc 18I-Tb
Main Spindle
Direction: Horizontal
Turning Diameters (Nominal/Max):1.000 "/1.000 "
Turning Lengths (Nominal/ Max): 9.842 " /9.842 "
Collet Type/Capacity Guide Bushing
Bar Capacity Standard:1.000 " Maximum:--
Sub-Spindle
Turning Diameters (Nominal/Max): 1.000 "/1.000 "
Speed: 200 - 5000
Drive Motor (Hp): 7.3
Headstock - Spindle 1
Nose: Guide Bushing
Speed: 6000 Rpm
Drive Motor (Hp): 15.0
Range: 1
Tooling Type: Slide(Primary)/Turret(Second)
Max. Number of Tools Turning: 7(Primary) / 8(Second)
Max. Number of Tools Rotary: 2(Primary )/ 4(Second)
Tool Shank Size (Inches)
Square(Primary/Second): --/ 0.500 "
Round(Primary/Second): 0.750 "/ 1.000 "
Rotary (Primary/Second): 0.250 "/ 0.500 "
Rotary Tooling
Horse Power (30 Min.) (Primary/Second): 0.7 / 1.9
Rpm(Primary/Second): 8000/ 5400
Max. Number of Simultaneous Cutting Tools: 2
Machine Net Weight(Pounds): 13200
Floor Layout:
--Length: 137 "
--Width: 80 "
--Height: 69 "
Axis Specifications
Std. No. Axes: 8 Axis
X1 (Travel/Traverse Rate/Feed Rate): 1.378 Inch / 472 Ipm / 236 Ipm
Z1 (Travel/Traverse Rate/Feed Rate): 9.842 Inch / 944 Ipm / 236 Ipm
C1 (Travel): 360.000 Deg.
Y1 (Travel/Traverse Rate/Feed Rate): 9.448 / 472 Ipm / 236 Ipm
X2 (Travel/Traverse Rate/Feed Rate): 4.330 Inch / 472 Ipm / 236 Ipm
Z2 (Travel/Traverse Rate/Feed Rate): 5.511 Inch / 944 Ipm / 236 Ipm
Y2 (Travel/Traverse Rate/Feed Rate): 3.149 Inch / 393 Ipm / 236 Ipm

Notes

-The Tsugami Bu26 (1" Capacity) Is Benchmark Product With Lineage
from the 80'S That Sets the Rules for Design, Power, Rigidity, and
Longevity. the Future of the Swiss-Type Machine Technology.
-Now, Taking Advantage of New Control Technology With Fanuc 18It
Control, Increased Power and Drives It's More Efficient Than Ever.
-A Wide Assortment of Driven Tools for the Rear Turret Driven Tool
Stations Is Available, Also Included Are Driven Cross Tools on the
Front Slide, Making This the Most Flexible of Models.
-An 8-Station Turret (3-Axis), Plus an Independent Gang Tool Slide
With Driven Tools Permits Many Simultaneous Functions. Balanced Turning,
Balanced Threading, Simultaneous Front and Back Working.
-Standard Are a 15Hp Main Spindle, 7.5Hp Sub-Spindle With Through Feed
Capability, 6-Axis Including X1,X2,Z1,Z2,Z3, and Y. Excellent for
Complex Machining.