I want to sell a machine like this
- CNC Swiss
- Ganesh
- CYCLONE-52 TTMY
- CNC Swiss Lathe
- 52mm
- 2011
- C Axis:
- Y Axis:
- Number of Axis: Yes
- Dual Spindles:
- Live Tooling:
Specifications
GANESH CYCLONE-52 TTMY DUAL SPINDLE CNC LATHE SPECIFICATIONS:CAPACITY
Maximum turning diameter Inch 7.48" (190 mm)
Maximum turning length Inch 15.75" (400 mm)
SPINDLE
Spindle nose ASA Size A2-5
Spindle Bore Inch 2.40" (61 mm)
Spindle Bar Capacity Inch 2.0" (52 mm)
Chuck Size Inch 6"
Maximum spindle speedRPM 60-6,000 RPM (Integral Spindle) / 4,000 RPM Heavy Duty
Spindle motor horsepower 20-HP peak, 15-HP (30-minute duty rating)
SUB SPINDLE
Spindle nose ASA Size A2-5
Spindle Bore Inch 2.40" (61 mm)
Spindle Bar Capacity Inch 2.0" (52 mm)
Chuck Size Inch 6"
Spindle Center Height Inch 46.45" (1,180mm)
Maximum spindle speed RPM 60-6,000 RPM (Integral Spindle)
Spindle motor horsepower 20-HP peak, 15-HP (30-minute duty rating)
LIVE TOOL TURRETS
Dual 16-Station Live Tool Turrets
Number of turret stations 16 x 2 32 (Any combination of 32 ID, OD or Live tool stations)
Turret index time (adjacent tool) Seconds 0.2 seconds
Turret index time (180-degree index) Seconds 1.2 seconds
Tool Size Inch 25mm (for square tool and round tool)
Collet Size Inch ER-32
Tool Holder Type & Size BMT65 Base Mount Tooling
Turret Thru-The-Tool-Coolant Optional 1,000 PSI High Pressure
"Y" AXIS
Y axis travel (Upper Turret only) Inch +/- 1.38" (35mm)
Y axis Rapid Feed Rate Inch 236 Inch Per Minute (6m per minute)
"C" AXIS
Spindle Radial Resolution0.001^0360,000 radial positions + full contouring capability
RPM for Live Tools RPM 25 - 4,000 RPM
"B" AXIS (sub spindle)
B Axis Rapid Traverse Rate Inch1,573 Inch Per Minute (40m per minute)
B Axis Travel Inch 25.59" (650mm)
AXIS SPECIFICATIONS
Axis Travel - X1, X2 - Axis Inch X1 5.94" (150mm), X2 9.05" (230 mm)
Axis Travel - Z1, Z2 - Axis Inch Z1 & Z2 17.32" (440mm)
Rapid Travers Rate - X-axis ipm 630 ipm (16 m/minute)
Rapid Travers Rate - Z-axis ipm 1,573 ipm (40 m/minute)
Minimum Programmable Input Inch 0.000039" (0.001mm)
Positioning Repeatability - X-Axis Inch 0.000050" (0.012 mm)
Positioning Repeatability - Y-Axis Inch 0.000050" (0.012 mm)
Positioning Repeatability - Z-Axis Inch 0.00010" (0.002 mm)
Positioning Accuracy - X-Axis Inch 0.00020" (0.004 mm)
Positioning Accuracy - Y-Axis Inch 0.00020" (0.004 mm)
Positioning Accuracy - Z-Axis Inch 0.00040" (0.008 mm)
FLUID CAPACITY
Hydraulic Tank Gallons 10.5 gallons (40 Liters)
Coolant Tank Gallons 70 gallons (280 Liters)
MACHINE WEIGHT Pounds 26,500lbs
MACHINE DIMENSIONS Inch Length 150" / Width 105"/ Height 90"
Notes
GANESH CYCLONE - 52-TTMY
TWIN-SPINDLE, TWIN-TURRET CNC
MILL / TURN LATHE WITH "Y"
AXIS "Y"- AXIS ON UPPER
TURRET & "C"- AXIS ON MAIN
AND SUB SPINDLE DUAL
16-STATION LIVE TOOL TURRETS
for 32-TOOLS TOTAL COMBINE
TURNING & MILLING FRONT &
BACK-SIDE FOR A FINISHED PART
IN JUST ONE OPERATION. Dual
16-Station High Speed Tool
Turrets Dual 16-station
driven tool turrets provide
32-tool stations that feature
high-speed 0.15-second
bi-directional indexing and
shortest path indexing logic
for fast tool changes. Both
16-station tool turrets
features 7-HP driven tool
capability on all 32-tool
stations, providing the
muscle needed to handle cross
and end-working milling. The
4,000-RPM driven tool system
provides a constant cutting
torque of 14.75 ft lbs (20
nm). The BMT tooling system
used on the Cyclone-52 is
much stronger with greater
rigidity and far superior
alignment characteristics
than other tooling system.
Mix and match tooling on any
station for the ultimate in
set-up flexibility.
Pre-Tensioned Double Anchored
Balls Screws - Premium
quality double-net ball
screws are pre-tensioned and
anchored at both ends, and
then 100% inspected for
parallelism to the axis
guideways. The rotational
torque of each ballscrew is
inspected over the entire
length of travel to guarantee
a true smooth non-binding
alignment to ensure maximum
service life and the highest
possible machining accuracy.
The geometric ball bar test
conducted on each machine
checks for servo gain
synchronization, backlash,
lateral play, squareness, and
straightness to ensure your
machine will perform to our
rigid accuracy and
performance standards. Laser
technology is employed to
measure linear and pitch
error accuracy and
repeatability to ensure high
quality standards for machine
performance. Integral
(Built-in) Spindle Motors
Motors with built-in spindles
provide the maximum cutting
torque (There are no belts to
reduce the torque and HP) and
provide the highest rate of
spindle acceleration and
deceleration. A spindle
refrigeration unit is
provided. Both hydraulic
actuation cylinders feature
stroke control position
monitoring for workholding
safety. Full "Y" Axis The
upper tool turret features a
full Y-axis with +/- 35mm
travels for off center
milling and drilling work.
Full "C" Axis on Main and Sub
Spindle The main and the sub
spindle both feature an
independent full "C" axis
with a 0.001 degree
increments for 360,000 radial
positions and full contouring
capability. Axial, radial,
and angled toolholders are
all available. Barfeeder
Interface The machine comes
standard with a barfeeder
interface to make it easy to
add a barfeeder. A variety of
optional 12' barfeeders and
4' automatic barloaders are
available to meet your
production needs. Automatic
Lubrication System The
automatic lubrication system
operates on a timed interval
and monitors low oil level
and will stop the machine at
the end of the current cycle
if a fault condition occurs.
A meter valve regulates oil
flow, which is pumped at
timed intervals through tubes
to distributor orifices on
the linear guideway trucks
and the axis ballscrew nuts.