Sold!
Buy one like this

I want to sell a machine like this

  • CNC Swiss
  • Ganesh
  • Cyclone 32CS
  • Lathe - CNC
  • 32mm
  • 2006
  • C Axis:
  • Y Axis:
  • Live Tooling:
 Ganesh Cyclone 32CS Lathe - CNC 32mm 2006

Specifications

Main Spindle
Spindle Motor: 10 HP
Max. RPM: 6000 RPM
Collet Nose: Traub A-32
Max. Barstock Diameter: 1.25"
X-Axis Travel: 7.28"
Y-Axis Travel: 19.29"
Z-Axis Travel: 6.5"
Rapid Travel Speed: 1180 IPM
Minimum Input Unit: 50 Millionths (.00005")
OD Turning Tool Positions: 6 OD
ID Turning Tool Positions: 5 ID
OD Turning Tool Size: 1/2"
ID Turning Tool Bore Size: 1"
Spindle Center Height: 38"
Sub Spindle
Sub Spindle Motor: 5 HP Continuous (7.5 HP Peak)
Max. Barstock Diameter: 1.25"
Sub Spindle RPM: 6000 RPM
X-Axis Travel: 11.53"
Z-Axis Travel: 11.61"
Minimum Input Unit: 50 Millionths (.00005"
ID Turning Tool Bore Size: 1"
Air Blast Nozzle: Included
Finshed Parts Ejector: Included
Live Tooling
Cross Slide Live Tools: 4
Back End Working Live Tools: 4
Live Tool Collet Size: ER-20
Max. RPM for Live Tools: 4000 RPM
Approx. Machine Dimensions: 95" x 59" x 76"
Approx. Machine Weight: 8400 lbs.
Coolant Pump: Dual Coolant Pumps
Lubrication Distribution: 3-6cc/15 minutes

Notes

Full C-Axis on Main & Sub Spindles
-3/4 and 1/4 HP Dual Coolant System
-Part Conveyor
-17 Collets
-RS323 Port
-Floppy Drive
Front Slide Live Tools: 3
-4 Spindle Liners (.5". .562", 1", Approx .75")
-Automatic Barfeed Interface, Tool Box and Tool Kit
-Traub A-32 Collet System
-Finished Parts Catcher and Parts Conveyor
-Sub Spindle Programmable Air Blast and Finished Parts Ejector
-Spindle Chiller
**Bar Feed: POR
**Less Than 1-Shift/Day**
**Current Replacement Cost - $119,900*
Machine: 89" x 54" x 78" 6,500 lbs
Chip Pan: 42" x 56" x 20" 150 lbs
Tool Chest: 34" x 17" x 29" 75 lbs